---
title: "BWRO Plant Manufacturer | Brackish Water RO Plant | Filtsap"
description: "Brackish water RO (BWRO) plants for borewell, river and treated water up to 10,000 ppm TDS: pre-treatment, membranes, CIP and instruments, sized to your…"
source: https://www.filtsap.com/products/bwro-plant/
updated: 2026-11-18
---

## At a glance

Feed waterBorewell, river, canal, municipal or treated wastewater; about 1,000 to 10,000 ppm TDS

Capacity range250 LPH to 50 m³/hr permeate per skid (larger as multi-train)

Salt rejectionTypically 95–99% (depends on membrane and feed)

RecoveryTypically 65–80%, set by hardness and silica

MembranesLow-energy brackish water elements, 4" × 40" or 8" × 40", in FRP pressure vessels

Operating pressureTypically about 10 to 20 bar, depending on feed TDS and temperature

- Boiler feed
- Process water
- Pharma and food
- Textile dyeing
- Cooling tower make-up
- ETP/STP water reuse

Built to your water analysis

# Brackish Water RO (BWRO) Plant

Designed, supplied and commissioned per project

[Ask on WhatsApp](https://wa.me/918160852169?text=Hello%20Filtsap%2C%20I%20need%20a%20quote%20for%20Brackish%20Water%20RO%20(BWRO)%20Plant.)

**Quick answer** A brackish water RO (BWRO) plant removes dissolved salts from water with about 1,000 to 10,000 ppm TDS, such as borewell, river, canal and treated wastewater. Filtsap builds skid-mounted BWRO plants from 250 LPH to 50 m³/hr with pre-treatment, antiscalant dosing, 5 micron cartridge filters, a high-pressure pump, low-energy brackish membranes in pressure vessels, CIP and online instruments. Recovery is typically 65 to 80 percent, set by the hardness and silica in your water.

A BWRO plant is sized from the raw water report: TDS, hardness, alkalinity, silica, iron and SDI decide the recovery, the antiscalant dose and the pre-treatment. High recovery on hard or silica-rich water is the usual reason membranes scale and fail early, so we set recovery from the analysis, not the other way round.

Use the free [RO plant calculator](https://www.filtsap.com/tools/ro-plant-calculator/)  for a first estimate, then send your water analysis for a checked design. See also our [industrial RO plants](https://www.filtsap.com/products/industrial-ro-plant/)  and [seawater RO (SWRO) plants](https://www.filtsap.com/products/swro-plant/) .

## Technical specifications

| Feed water | Borewell, river, canal, municipal or treated wastewater; about 1,000 to 10,000 ppm TDS |
| --- | --- |
| Capacity range | 250 LPH to 50 m³/hr permeate per skid (larger as multi-train) |
| Salt rejection | Typically 95–99% (depends on membrane and feed) |
| Recovery | Typically 65–80%, set by hardness and silica |
| Membranes | Low-energy brackish water elements, 4" × 40" or 8" × 40", in FRP pressure vessels |
| Operating pressure | Typically about 10 to 20 bar, depending on feed TDS and temperature |
| Pre-treatment | Multigrade or dual media filter, activated carbon filter, antiscalant dosing, 5 µm cartridge filter |
| Instrumentation | Online TDS / conductivity, flow meters, pressure gauges, pressure switches |
| Skid and piping | MS powder-coated or SS frame; UPVC or SS 316 piping |
| Options | CIP skid, UF pre-treatment, PLC panel, permeate UV, remote monitoring |

## Available models

| Permeate capacity | Typical membranes (borewell water) | Feed flow at 75% recovery |
| --- | --- | --- |
| 250 LPH | 2 × 4" elements | about 335 LPH |
| 1,000 LPH | 2 × 8" elements | about 1,335 LPH |
| 5,000 LPH | 6 × 8" elements | about 6.7 m³/hr |
| 10 m³/hr | about 11–12 × 8" elements | about 13.3 m³/hr |
| 25 m³/hr | about 28–30 × 8" elements | about 33 m³/hr |
| 50 m³/hr | about 54–56 × 8" elements | about 67 m³/hr |

## Applications

- Boiler feed
- Process water
- Pharma and food
- Textile dyeing
- Cooling tower make-up
- ETP/STP water reuse
- Drinking water for townships

## FAQs

What is a BWRO plant?

A BWRO plant is a reverse osmosis plant for brackish water, which has more salt than fresh water but far less than seawater, roughly 1,000 to 10,000 ppm TDS. It uses low-energy membranes at moderate pressure.

What is the difference between BWRO and SWRO?

BWRO treats brackish water at about 10 to 20 bar with 65–80% recovery. SWRO treats seawater at about 55 to 70 bar with 35–45% recovery and uses corrosion-resistant high-pressure parts.

What recovery can a BWRO plant achieve?

Typically 65 to 80 percent. Hard, silica-rich or iron-bearing water needs a lower recovery or stronger pre-treatment, which we set from your water analysis.

What do you need to quote a BWRO plant?

A raw water analysis (TDS, hardness, alkalinity, silica, iron, chloride, SDI if available), the treated water needed per day, running hours and the end use.

## Why buy from Filtsap

-  Direct manufacturer, not a trader
-  Cartridges and filter bags made in our own unit
-  In business since 2018
-  Supply and export worldwide

## Related products

### [Industrial RO Plant](https://www.filtsap.com/products/industrial-ro-plant/)

Membrane Systems · MOQ 1 plant

### [Seawater RO (SWRO) Plant](https://www.filtsap.com/products/swro-plant/)

Membrane Systems · MOQ 1 plant

### [Multigrade Filter (MGF) / Multimedia Filter](https://www.filtsap.com/products/multigrade-filter-mgf/)

Water Treatment Systems · MOQ 1 plant

## Need a BWRO plant?

Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.

[Get a quote](https://www.filtsap.com/get-quote/) [WhatsApp](https://wa.me/918160852169?text=Hello%20Filtsap%2C%20I%20need%20a%20quote.)
