
At a glance
- Vessels
- FRP pressure vessels; MS rubber-lined for larger flows
- Layout
- Cation + anion (two-bed); with degasser (three-bed); with mixed-bed polisher
- Resin
- Strong acid cation and strong base anion; mixed-bed nuclear-grade on request
- Outlet quality
- Two-bed typically below 10 µS/cm; mixed-bed typically below 1 µS/cm; low silica
- Regeneration
- Acid (HCl or H₂SO₄) for cation, caustic (NaOH) for anion, with dosing and storage
- Control
- Manual multiport valves, or automatic valves with PLC
- Boiler feed water
- Power and steam plants
- Pharma and process water
- Battery and electronics
- Chemical plants
- Laboratories
A DM plant is sized on the salts in your water and the flow you need between regenerations. We size resin volume and vessels from your water analysis and daily demand, then choose a two-bed, three-bed or mixed-bed layout for the purity required.
Where TDS is high, an RO plant ahead of the DM plant cuts resin regeneration cost. See our industrial RO plants and water softener plants.
Technical specifications
| Vessels | FRP pressure vessels; MS rubber-lined for larger flows |
|---|---|
| Layout | Cation + anion (two-bed); with degasser (three-bed); with mixed-bed polisher |
| Resin | Strong acid cation and strong base anion; mixed-bed nuclear-grade on request |
| Outlet quality | Two-bed typically below 10 µS/cm; mixed-bed typically below 1 µS/cm; low silica |
| Regeneration | Acid (HCl or H₂SO₄) for cation, caustic (NaOH) for anion, with dosing and storage |
| Control | Manual multiport valves, or automatic valves with PLC |
| Pre-treatment | Multigrade filter and activated carbon filter for turbidity, chlorine and organics |
| Waste handling | Neutralization pit for regeneration waste |
Available models
| FRP vessel (cation or anion) | Approx. flow per train at 25 m/h service velocity |
|---|---|
| 1354 | about 2.1 m³/hr |
| 1665 | about 3.2 m³/hr |
| 2162 | about 5.6 m³/hr |
| 2472 | about 7.3 m³/hr |
| 3072 | about 11.4 m³/hr |
| 3672 | about 16.4 m³/hr |
| 4872 | about 29.2 m³/hr |
Applications
- Boiler feed water
- Power and steam plants
- Pharma and process water
- Battery and electronics
- Chemical plants
- Laboratories
FAQs
What is a DM plant?
A DM plant, or demineralization plant, removes dissolved salts from water by ion exchange to give water of very low conductivity, used mainly for boiler feed and process water.
What is the difference between a DM plant and an RO plant?
RO removes most salts with membranes and no chemicals for regeneration. A DM plant removes nearly all ions with resin but needs acid and caustic to regenerate. Many plants use RO first, then DM or mixed-bed to polish.
Do I need a mixed-bed unit?
Only if you need conductivity below 1 µS/cm, for example for high-pressure boilers or pharma. A two-bed plant is enough for most low-pressure boilers.
What do you need to quote a DM plant?
A raw water analysis (cations, anions, silica, TDS), the DM water needed per hour and per day, the outlet quality and the end use.
Why buy from Filtsap
- Direct manufacturer, not a trader
- Cartridges and filter bags made in our own unit
- In business since 2018
- Supply and export worldwide
Need a DM plant?
Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.


