FILTER → SUPPLY → MONITOR → BUILD · From filtration consumables to complete water treatment solutions · Get a quote →

At a glance

Vessel
FRP pressure vessel; MS rubber-lined or SS for larger flows
Media
Anthracite over filter sand, over a graded gravel support bed
Service velocity
Typically about 10 to 15 m/h
Removes
Suspended solids, turbidity, and lowers SDI before RO
Control
Manual multiport valve, or automatic valve (timer or differential pressure)
Backwash
Backwash and rinse cycle with the bed expanded and re-graded
  • RO and UF pre-treatment
  • Seawater pre-treatment
  • River and lake water
  • Cooling water
  • Industrial process water
  • Swimming pools
Quick answerA dual media filter (DMF) removes suspended solids and turbidity using two layers of media, anthracite over filter sand, in a pressure vessel. The coarse light anthracite catches larger particles at the top and the dense sand polishes below, so the bed holds more dirt and runs longer than a single sand filter. Filtsap supplies DMF in FRP vessels with gravel support, internals and manual or automatic valves.

A DMF is a common first stage for RO and UF plants, where it lowers turbidity and SDI. We size the vessel from the peak flow at a safe service velocity and choose the bed depth from your raw water.

See also the multigrade filter (MGF), activated carbon filter (ACF) and SWRO plants, which use DMF as pre-treatment.

Technical specifications

VesselFRP pressure vessel; MS rubber-lined or SS for larger flows
MediaAnthracite over filter sand, over a graded gravel support bed
Service velocityTypically about 10 to 15 m/h
RemovesSuspended solids, turbidity, and lowers SDI before RO
ControlManual multiport valve, or automatic valve (timer or differential pressure)
BackwashBackwash and rinse cycle with the bed expanded and re-graded
PositionFirst stage, before ACF, softener, UF or RO

Available models

FRP vesselApprox. flow per vessel
1354about 1.0 m³/hr
1665about 1.6 m³/hr
2162about 2.7 m³/hr
2472about 3.5 m³/hr
3072about 5.5 m³/hr
3672about 7.9 m³/hr
4872about 14.0 m³/hr

Applications

  • RO and UF pre-treatment
  • Seawater pre-treatment
  • River and lake water
  • Cooling water
  • Industrial process water
  • Swimming pools

FAQs

What is a dual media filter?

A dual media filter (DMF) is a pressure filter with two media layers, usually anthracite on top and sand below, to remove suspended solids and turbidity.

What is the difference between DMF and MGF?

A DMF uses two media, anthracite and sand. An MGF uses several grades of media. Both do the same job, and the choice depends on the raw water and duty.

Does a DMF lower SDI?

Yes. It removes the fine suspended solids that raise SDI. Most RO plants use a DMF or MGF, then a 5 micron cartridge filter, to keep SDI within the membrane limit.

What size dual media filter do I need?

Divide your peak flow by a service velocity of about 10 to 15 m/h to get the bed area, then pick the vessel. Send your flow and water analysis and we size it.

Why buy from Filtsap

  • Direct manufacturer, not a trader
  • Cartridges and filter bags made in our own unit
  • In business since 2018
  • Supply and export worldwide

Need a dual media filter?

Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.

Call WhatsApp Get quote