FILTER → SUPPLY → MONITOR → BUILD · From filtration consumables to complete water treatment solutions · Get a quote →

At a glance

Feed water
Seawater and high-TDS brine; about 30,000 to 45,000 ppm TDS
Salt rejection
Typically 99% or better with seawater membranes
Recovery
Typically 35–45%
Operating pressure
Typically about 55 to 70 bar
Membranes
Seawater elements, 8" × 40", in high-pressure FRP vessels
High-pressure side
Duplex stainless steel or SS 316L piping and fittings; high-pressure pump rated for the duty
  • Coastal industry process water
  • Power plants
  • Refineries and chemical plants
  • Shipyards and ports
  • Hotels and resorts
  • Island and coastal communities
Quick answerA seawater RO (SWRO) plant turns seawater of about 30,000 to 45,000 ppm TDS into low-salinity water for industry or drinking. Filtsap builds skid-mounted SWRO plants with multimedia or ultrafiltration pre-treatment, antiscalant dosing, cartridge filters, a high-pressure pump, seawater membranes in high-pressure vessels, corrosion-resistant piping and online instruments. Recovery is typically 35 to 45 percent at about 55 to 70 bar.

Seawater is hard on equipment. High pressure, chloride and biological growth mean a SWRO plant needs corrosion-resistant materials on the high-pressure side and strong pre-treatment at the intake. We design the pre-treatment, materials and recovery around your intake water analysis and site.

For lower-salinity feed see BWRO plants and industrial RO plants.

Technical specifications

Feed waterSeawater and high-TDS brine; about 30,000 to 45,000 ppm TDS
Salt rejectionTypically 99% or better with seawater membranes
RecoveryTypically 35–45%
Operating pressureTypically about 55 to 70 bar
MembranesSeawater elements, 8" × 40", in high-pressure FRP vessels
High-pressure sideDuplex stainless steel or SS 316L piping and fittings; high-pressure pump rated for the duty
Pre-treatmentDual media or multigrade filter, ultrafiltration where needed, antiscalant, 5 µm cartridge filter
Energy recoveryConsidered for larger plants
InstrumentationOnline conductivity, flow meters, pressure transmitters, pressure switches
OptionsCIP skid, post-treatment, PLC panel, remote monitoring

Available models

Permeate capacityTypical membranes (seawater)Feed flow at 40% recovery
1 m³/hrabout 2 × 8" elementsabout 2.5 m³/hr
5 m³/hrabout 9–10 × 8" elementsabout 12.5 m³/hr
10 m³/hrabout 18–20 × 8" elementsabout 25 m³/hr
25 m³/hrabout 45–50 × 8" elementsabout 62 m³/hr
50 m³/hrabout 90–100 × 8" elementsabout 125 m³/hr

Applications

  • Coastal industry process water
  • Power plants
  • Refineries and chemical plants
  • Shipyards and ports
  • Hotels and resorts
  • Island and coastal communities

FAQs

What is a SWRO plant?

A SWRO plant is a reverse osmosis desalination plant for seawater. It pushes seawater through membranes at about 55 to 70 bar to produce low-salinity water.

Why is SWRO recovery lower than BWRO?

Seawater has a much higher osmotic pressure, so only about 35 to 45 percent can be recovered before the pressure and salt in the reject become too high.

What materials are used in a SWRO plant?

Duplex stainless steel or SS 316L on the high-pressure side, FRP pressure vessels and corrosion-resistant fittings, chosen for chloride and pressure.

What do you need to quote a SWRO plant?

The intake water analysis (TDS, temperature, SDI, turbidity), the product water needed per day, the intake type and the product water quality required.

Why buy from Filtsap

  • Direct manufacturer, not a trader
  • Cartridges and filter bags made in our own unit
  • In business since 2018
  • Supply and export worldwide

Need a SWRO plant?

Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.

Call WhatsApp Get quote