
At a glance
- Feed water
- Borewell, river, canal, municipal or treated wastewater; about 1,000 to 10,000 ppm TDS
- Capacity range
- 250 LPH to 50 m³/hr permeate per skid (larger as multi-train)
- Salt rejection
- Typically 95–99% (depends on membrane and feed)
- Recovery
- Typically 65–80%, set by hardness and silica
- Membranes
- Low-energy brackish water elements, 4" × 40" or 8" × 40", in FRP pressure vessels
- Operating pressure
- Typically about 10 to 20 bar, depending on feed TDS and temperature
- Boiler feed
- Process water
- Pharma and food
- Textile dyeing
- Cooling tower make-up
- ETP/STP water reuse
A BWRO plant is sized from the raw water report: TDS, hardness, alkalinity, silica, iron and SDI decide the recovery, the antiscalant dose and the pre-treatment. High recovery on hard or silica-rich water is the usual reason membranes scale and fail early, so we set recovery from the analysis, not the other way round.
Use the free RO plant calculator for a first estimate, then send your water analysis for a checked design. See also our industrial RO plants and seawater RO (SWRO) plants.
Technical specifications
| Feed water | Borewell, river, canal, municipal or treated wastewater; about 1,000 to 10,000 ppm TDS |
|---|---|
| Capacity range | 250 LPH to 50 m³/hr permeate per skid (larger as multi-train) |
| Salt rejection | Typically 95–99% (depends on membrane and feed) |
| Recovery | Typically 65–80%, set by hardness and silica |
| Membranes | Low-energy brackish water elements, 4" × 40" or 8" × 40", in FRP pressure vessels |
| Operating pressure | Typically about 10 to 20 bar, depending on feed TDS and temperature |
| Pre-treatment | Multigrade or dual media filter, activated carbon filter, antiscalant dosing, 5 µm cartridge filter |
| Instrumentation | Online TDS / conductivity, flow meters, pressure gauges, pressure switches |
| Skid and piping | MS powder-coated or SS frame; UPVC or SS 316 piping |
| Options | CIP skid, UF pre-treatment, PLC panel, permeate UV, remote monitoring |
Available models
| Permeate capacity | Typical membranes (borewell water) | Feed flow at 75% recovery |
|---|---|---|
| 250 LPH | 2 × 4" elements | about 335 LPH |
| 1,000 LPH | 2 × 8" elements | about 1,335 LPH |
| 5,000 LPH | 6 × 8" elements | about 6.7 m³/hr |
| 10 m³/hr | about 11–12 × 8" elements | about 13.3 m³/hr |
| 25 m³/hr | about 28–30 × 8" elements | about 33 m³/hr |
| 50 m³/hr | about 54–56 × 8" elements | about 67 m³/hr |
Applications
- Boiler feed
- Process water
- Pharma and food
- Textile dyeing
- Cooling tower make-up
- ETP/STP water reuse
- Drinking water for townships
FAQs
What is a BWRO plant?
A BWRO plant is a reverse osmosis plant for brackish water, which has more salt than fresh water but far less than seawater, roughly 1,000 to 10,000 ppm TDS. It uses low-energy membranes at moderate pressure.
What is the difference between BWRO and SWRO?
BWRO treats brackish water at about 10 to 20 bar with 65–80% recovery. SWRO treats seawater at about 55 to 70 bar with 35–45% recovery and uses corrosion-resistant high-pressure parts.
What recovery can a BWRO plant achieve?
Typically 65 to 80 percent. Hard, silica-rich or iron-bearing water needs a lower recovery or stronger pre-treatment, which we set from your water analysis.
What do you need to quote a BWRO plant?
A raw water analysis (TDS, hardness, alkalinity, silica, iron, chloride, SDI if available), the treated water needed per day, running hours and the end use.
Why buy from Filtsap
- Direct manufacturer, not a trader
- Cartridges and filter bags made in our own unit
- In business since 2018
- Supply and export worldwide
Need a BWRO plant?
Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.
