
At a glance
- Vessel
- FRP pressure vessel; MS rubber-lined or SS for larger flows
- Media
- Graded layers of filter sand and gravel over a support bed
- Service velocity
- Typically about 10 to 15 m/h
- Removes
- Suspended solids, silt, turbidity (typically down to about 20 to 40 microns)
- Control
- Manual multiport valve, or automatic valve (timer or differential pressure)
- Backwash
- Backwash and rinse cycle, typically at a higher velocity than service
- RO and UF pre-treatment
- Borewell and river water
- Cooling tower side-stream
- Boiler feed pre-treatment
- Food and beverage water
- Swimming pools
A multigrade filter holds solids throughout the depth of the bed, so it runs longer between backwashes than a single-layer sand filter. We size the vessel from your peak flow at a safe service velocity and pick the media grades for your turbidity.
See the related dual media filter (DMF) and activated carbon filter (ACF), and the FRP vessel range.
Technical specifications
| Vessel | FRP pressure vessel; MS rubber-lined or SS for larger flows |
|---|---|
| Media | Graded layers of filter sand and gravel over a support bed |
| Service velocity | Typically about 10 to 15 m/h |
| Removes | Suspended solids, silt, turbidity (typically down to about 20 to 40 microns) |
| Control | Manual multiport valve, or automatic valve (timer or differential pressure) |
| Backwash | Backwash and rinse cycle, typically at a higher velocity than service |
| Position | First stage, before ACF, softener, UF or RO |
Available models
| FRP vessel | Approx. flow per vessel |
|---|---|
| 1354 | about 1.0 m³/hr |
| 1665 | about 1.6 m³/hr |
| 2162 | about 2.7 m³/hr |
| 2472 | about 3.5 m³/hr |
| 3072 | about 5.5 m³/hr |
| 3672 | about 7.9 m³/hr |
| 4872 | about 14.0 m³/hr |
Applications
- RO and UF pre-treatment
- Borewell and river water
- Cooling tower side-stream
- Boiler feed pre-treatment
- Food and beverage water
- Swimming pools
FAQs
What is a multigrade filter?
A multigrade filter (MGF) is a pressure filter with layers of filter media of different grades. Coarse media on top catches large particles and finer media below catches smaller ones.
Is MGF the same as MMF?
The terms are used for the same job, removing suspended solids with layered media. Multimedia filter (MMF) is also used for filters with different media types, like anthracite and sand.
How often does an MGF need backwashing?
Typically once a day or when pressure drop rises by about 0.5 bar over the clean bed, depending on turbidity. Automatic valves can run it on a timer or differential pressure.
What size multigrade filter do I need?
Divide your peak flow by a service velocity of about 10 to 15 m/h to get the bed area, then pick the vessel. Send your flow and turbidity and we size it.
Why buy from Filtsap
- Direct manufacturer, not a trader
- Cartridges and filter bags made in our own unit
- In business since 2018
- Supply and export worldwide
Need a multigrade filter?
Send the details on WhatsApp or through the form. An engineer reads every enquiry before we quote.
